Besides the innovative housing design, we adapted a compact, highly effective and highly reliable LED module to the MLI illuminant.
There are several types of optics that enable adaptation to any type of industry because the MLI illuminant is useful for low shelves, high shelves and general applications. The modular approach which has been in use since 2008 enables lowest costs for maintenance after the warranty period and ecological decommissioning after the end of service life. Aluminum basis is additionally corrosion protected from environmental impacts.
The MLI illuminant was fully developed and manufactured in Slovenia.
For industrial applications, we use only the most quality power supplies, it has a built-in temperature regulation, overvoltage protection and different regulation inputs. In the near future, the customer thus shall not have additional costs for the remaking of the lamp in case of technological changes in regulation or consumption control.
MLI04600840LT0A1S 60W 8400lm 4000K Ra>80 lamb. 206 x 95 x 400mm MLI081201640LT0A1S 120W 16800lm 4000K Ra>80 lamb. 206 x 95 x 750mm MLI111622540LT0A1S 180W 25200lm 4000K Ra>80 lamb. 206 x 95 x 1170mm
MLI04600840FT0A1S 60W 7700lm 4000K Ra>80 HB 206 x 95 x 400mm MLI081201640FT0A1S 120W 15500lm 4000K Ra>80 HB 206 x 95 x 750mm MLI111622540FT0A1S 180W 23200lm 4000K Ra>80 HB 206 x 95 x 1170mm
The designation L means an adapted light source for ceilings up to 12m, where a lower level of glare and higher equability of illumination is needed. The designation F means an adapted optics for the illumination of high-shelf storages or a more selective illumination in ceilings higher than 24m.
MLI basic data:
60 - 180W
206x95x400 / 750 / 1170 mm
198 ~ 264V (320V AC, 48h), 0 / 50 / 60Hz
Light current (ɸv):
8.400 / 16.800 / 25.200 lm
Consump. in stand-by:
In accordance with specs:
DALI DT 6, DSI, switchDIM, U6Me2, ready2mains, R, 1~10V
6kV / 3kA permanent, 10kV max
Power range 60~180W and useful for mounting heights up to 24 m and more.
We guarantee 12 year supply of equivalent original spare parts for LED.
Simple mounting and maintenance.
Developed and manufactured in Slovenia.
There are different types of design optics available in accordance with customer’s wishes and demanded standards.
BASIC STANDARDS EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61000-4-4, EN 61000-4-5, EN 61347-1, EN 61347-2-13, EN 62384, EN 61547, EN 62386-101, EN 62386-102, EN 62386-207, Skladno z EN 50172, Skladno z EN 60598-2-22